Flat rate worldwide shipping

BN-220 GPS Module

$24.99

The BN-180 GPS is handpicked as it provides the best performance for it’s value.

It is tested and fully compatible with our iLogger modules, it offers a high accuracy and supports a wide range of frequencies and satellites.

This GPS is a plug and play module, it comes with all the cables you need + antenna to work out of the box with the iLogger.

Package includes: BN-180 GPS module + 2x 20CM cables + Antenna.

Out of stock

Description

Specs:

Dimension : 18mm*18mm*6mm
Weight : 4.9g
Connector : 1.00mm spacing between the 4pins patch seat

Electrical Characteristics

Chipset : u-blox M8030-KT
Receiving Format : GPS,GLONASS,Galileo,BeiDou,QZSS and SBAS
Frequency : GPS L1,GLONASS L1,BeiDou B1,SBAS L1,Galileo E1
Channels : 72 Searching Channel

Sensitivity

Tracking : -167dBm
Reacquisition : -160dBm
Cold start : -148dBm
Hot start : -156dBm

Accuracy

Position Horizontal : 2.0 m CEP 2D RMS SBAS Enable (Typical Open Sky)
Velocity : 0.1m/sec 95% (SA off)
Timing : 1us synchronized to GPS time

Acquisition Time

Cold Start : 26s
Warm start : 25s
Hot start : 1s

Data and Update Rate

Support Rate : 4800bps to 921600bps,Default 9600bps
Data Level : TTL or RS-232,Default TTL level
Data Protocol : NMEA-0183 or UBX, Default NMEA-0183
Single GNSS : 1Hz-18Hz
Concurrent GNSS : 1Hz-10Hz,Default 1Hz

Operational Limits

Altitude : 50,000m Max
Velocity : 515m/s Max
Acceleration : Less than 4g

Power consumption

VCC : DC Voltage 3.0V-5.5V,Typical: 5.0V
Current : Capture 50mA/5.0V
Operating temp : -40 °C ~ +85°C
Storage Temp : -40°C ~ +105°C

Indicator :

TX LED:blue.The data output, TX LED flashing
PPS LED:red.PPS LED not bright when GPS not fixed,flashing when fixed

Wiring:

GND,TX output,RX input,VCC(3.0v-5.5v)

Package Included

1 x BN-220 GPS Module
2 x 15cm Cable

Category: GPS Modules