Flat rate worldwide shipping

BN-220 GPS Module

$24.99

The BN-180 GPS is handpicked as it provides the best performance for it’s value.

It is tested and fully compatible with our iLogger modules, it offers a high accuracy and supports a wide range of frequencies and satellites.

This GPS is a plug and play module, it comes with all the cables you need + antenna to work out of the box with the iLogger.

Package includes: BN-180 GPS module + 2x 20CM cables + Antenna.

Out of stock

Specs:

  • Dimension : 18mm*18mm*6mm
  • Weight : 4.9g
  • Connector : 1.00mm spacing between the 4pins patch seat
Electrical Characteristics
  • Chipset : u-blox M8030-KT
  • Receiving Format : GPS,GLONASS,Galileo,BeiDou,QZSS and SBAS
  • Frequency : GPS L1,GLONASS L1,BeiDou B1,SBAS L1,Galileo E1
  • Channels : 72 Searching Channel

 

Sensitivity
  • Tracking : -167dBm
  • Reacquisition : -160dBm
  • Cold start : -148dBm
  • Hot start : -156dBm
Accuracy
  • Position Horizontal : 2.0 m CEP 2D RMS SBAS Enable (Typical Open Sky)
  • Velocity : 0.1m/sec 95% (SA off)
  • Timing : 1us synchronized to GPS time
Acquisition Time
  • Cold Start : 26s
  • Warm start : 25s
  • Hot start : 1s
Data and Update Rate
  • Support Rate : 4800bps to 921600bps,Default 9600bps
  • Data Level : TTL or RS-232,Default TTL level
  • Data Protocol : NMEA-0183 or UBX, Default NMEA-0183
  • Single GNSS : 1Hz-18Hz
  • Concurrent GNSS : 1Hz-10Hz,Default 1Hz
Operational Limits
  • Altitude : 50,000m Max
  • Velocity : 515m/s Max
  • Acceleration : Less than 4g
Power consumption
  • VCC : DC Voltage 3.0V-5.5V,Typical: 5.0V
  • Current : Capture 50mA/5.0V
  • Operating temp : -40 °C ~ +85°C
  • Storage Temp : -40°C ~ +105°C
Indicator :
  • TX LED:blue.The data output, TX LED flashing
  • PPS LED:red.PPS LED not bright when GPS not fixed,flashing when fixed
Wiring:
  • GND,TX output,RX input,VCC(3.0v-5.5v)
Package Included 
  • 1 x BN-220 GPS Module
  • 2 x 15cm Cable

 

Category:
Updating…
  • No products in the cart.